In contrast, my dumb phone holds enough charge to last 4 days on standby. The bottom line is that the more functionality your mobile device has, the shorter the battery life will be. These features include 4G antennas, multitasking apps, push notifications, WiFi/Bluetooth activity, background processes, and flash camera use.

I’m often asked for tips to prolong battery life on the iPhone 4S. For those without the software glitch, here are a few suggestions (some are phone agnostic):

• Shut down background apps. Back when I was writing TSR‘s, I learned that background processes with leaky memory will throttle cpu big time. On the iPhone 4S, hold the Home button until a list of apps appears on the screen. Hold onto one of the icons until they start shaking. You will also see a red negative sign. Hit the sign to shut down the apps. This is most useful in apps that require net access. On Android, you can use Advanced Task Killer.
• Disable Bluetooth when not in use. Obvious.
• Disable cell signal if you are in poor reception areas. If you’re not expecting calls or texts, this is the way to go.
• Disable push notifications on non-urgent apps.  Tricky. If you’re a day trader and rely on your texting/phone vibration for your job, you may be out of luck. You can also increase polling time.
• Disable Flash. Pertinent to Android devices. Yes, Flash is a battery killer.

There are many “disables” on this list. There are also a dozen other minor tweaks that can be found online. Be aware that apps typically aren’t screened as closely for memory leaks or routines that potentially cycle cpu time without effect. Your battery life will greatly depend on the apps you use daily.  Unfortunately we are still limited by our technology, but perhaps these recommendations will help get you through the day.

Given that the connection is based on cellphone tower technology, one would assume standard 3g data rates. That is exactly the case:

Of course, data rates vary tremendously, depending on location and the number of connected users.

Overall, the data speeds were tolerable for email and basic web surfing.

In-flight Wifi starts at $8 per flight if connecting on a mobile device, and $12 upward for laptops. Frequent flyers can also purchase monthly passes. I’d recommend using Seatguru to find the best flight/seats that have power outlets. Be wary of advertised power outlets though; a recent AA flight I took on MD-80 equipment advertised power outlets, but they were in the form of cigarette lighter outlets!

Unfortunately, I forgot to cancel the subscription since I was caught up managing some emergency room traumas that week.

Dang you, residency. Damn you, GoDaddy. None of the caching mechanisms ever worked to speed up this website. In fact, I tested the site on a Canadian server, and the ping time was less than half of that of the GoDaddy server. I guess I have to live with it for another year. If you are a web hosting service that buys off GoDaddy fees for switching hosts, contact me!

This game is ubiquitous. I see passengers in the subway and bus playing this game. My patient with cellulitis in the emergency room was playing Angry Birds while waiting to be triaged. I saw a medical student playing the game while waiting for rounds to begin.

For 99 cents, this game will occupy you for months. Get it now.

Due to legal pressures, I was forced to remove it online. This is unfortunate, because there are no other freely available, web-based calculators. Granted, most modern A-scan devices have these formulas built into them, but there is something to be said for crunching a few calculations without hunting down the scanner in the building. Too bad.

Unfortunately for the consumer, the modems provided are crap.

For instance AT&T offers some customers a variant of a DSL router manufactured by 2Wire. While the modems themselves are easy to install and relatively maintenance-free, I’ve heard nothing but trouble from those that experience problems. One of my friends’ 2Wire modems fizzled out soon after the 1-year warranty agreement by AT&T. The modem booted up, but the power light would remain red. Hard resets and power cycling did nothing to the modem. The model was a 2700-HGB. AT&T suggested to her to buy a new modem (for >$79). I found several online accounts similar problems with these modems, and it turns out to be a faulty capacitor in the modem or a faulty power supply.

The power supply unit offered by 2Wire cannot be purchased separately. However, several electronic devices in the market use a similar 5.1V head. The quick fix for the 2Wire 2700H-GB power supply is a PSP power adapter (like this). For a mere $5, you can get your modem back and running again. If it doesn’t work, you’re only down $5.

I’ve collected a bit of tweaks throughout the years to help keep my copy of XP competitive on older hardware. I’ve decided to post a list of optimization techniques for Windows XP, mainly for myself and those of you who still may be using this operating system. Refer to my previous guide on netbook optimization, as some of these suggestions overlap.

Firstly, these tips are not specific to any hardware, although some systems may not be amenable to these tweaks. Laptops, in particular, have specific drivers that may be required to function properly. Be warned.  Secondly, I expect a minimum baseline in your system (ie Pentium 2 is unlikely to respond as well as a Pentium 4).

1. Memory. No matter what type of computer you have, you need memory. From my experience in ECE110 (operating systems) in college, the memory will give a higher end-user speed improvement over clock speed (although clock speed is what drives the electric current to the memory). You should have at least 1gb in your system. If your computer is too old to warrant a memory upgrade and has too little (256mb), then any sort of optimization will be limited.
2. Stop indexing. My Computer->Right Click hard disk->uncheck “Allow indexing Service to index this disk for fast searching”. You don’t need this.
3. Stop unnecessary services. There are specific services that are required for your system. Check to make sure which ones you need, and cut out the ones you don’t. Go to Start->Run->”services.msc”. There is a list of services that you can uncheck. A few that I have found to be useless for the average home user include:
   1. Error Reporting Service
   2. Help and Support (Who ever uses this?)
   3. Fast User Switching (If you had enough power to support multi-user logins, you needn’t be using this article)
   4. Telephony
   5. Anything with “Remote Desktop”. Security hole.
   6. Messenger. No way.
4. Cut some of those special effects. You probably don’t need most of them: Control Panel->System->Advanced->Performance->Settings. Uncheck the drop shadows and visual styles.
5. Optimize startup. Cut out Office Launcher and Acrobat startup. Let them load on first run of opening Word/PDF files. If your taskbar is over a fifth of your desktop width, then you might have too many startup programs.
6. Ditch Symantec Antivirus. This program has memory leaks. I don’t understand why some universities still purchase a site license for this useless software. If you need antivirus, use something like Comodo Internet Security.
7. Try Bootvis. It can optimize startup order. It sped up my startup by 10 seconds!
8. Ditch some unnecessary fonts. Excess fonts that you never use can bog down word processing and any graphics editors that you use. Control Panel->Fonts. Choose some to remove. Just don’t forget to keep the basics.
9. Use a tweaking application. I used to use TweakUI, which eventually became encompassed by PowerToys. X-Setup is an extreme tweaking app that I found pretty helpful. You can enable “fast updates”, disable tooltips, and other optimization hacks. I obtained a noticeable speed increase after using this tool.
10. Remove unnecessary programs. Some of the programs that you installed and used once can have startup functions that slow down the boot process.

That’s it! These basic tweaks can bring life to any aging Windows XP system.

It seems like hardware has caught up the power race, and most desktop systems are capable of handling all but the most processor-intense applications. I’ve been one to believe that current computers are overpowered for their intended purposes. Who needs a dual-core with 2gb memory and 1gb video ram to browse the ‘net and word process? Indeed, there is no role for this in routine use, but I recently discovered that new hardware helps even with light software use.

I recently installed Microsoft’s Visual Studio with SQL Server onto my 1.7ghz Thinkpad. The installation burned through about 15gb of disk space (out of a 40gb disk) and took over an hour to complete. After the ancillary drivers were installed in place (.NET, Powershell…etc), the laptop ran like a 500-lb man after going through a Vegas buffet. I promptly uninstalled the software.

It’s probably time for an upgrade.

Fortunately for smartphone users (a la Blackberry, iPhone, and Android), Google has a suite of applications for Voice that use your data line, saving your monthly minutes. After you download the app, using it is self explanatory.

For those still stuck on a voice-only cellular plan, there is still an option with outgoing calls via Voice. As I can recall from my limited phreaking knowledge, voice lines all have a pause signal that you can deliver to the telephone stream. This can be invoked to automate your responses through a menu. Depending on the model of your phone, this pause signal can be represented by a number of symbols which may include the following:

• comma: “,”
• pause: “P”
• asterisk: “*”
• plus: “+”

My Samsung flip-phone has a dedicated pause signal that is invoked from the plus key when held for 1 second. With the pause signal in mind, dialing out with Voice is simple, albeit slightly slower with so many keystrokes.

For instance, to dial out Andrew via Voice, I program this into my address book:

XXX-XXX-XXXX P YYYY P 2 ZZZ-ZZZ-ZZZZ

“X” is my Voice number. “Y” is my PIN. The number ’2′ is the option to dial out via Voice. “Z” is Andrew’s number. The pauses are spaced out so as needed so that your keystrokes are registered. I’ve discovered that I do not need to deliver a pause signal after the ’2′ option. Again, no spaces are needed.

The entire process takes about 3 seconds to make the connection, but it is a reliable work-around for those of you without a data plan.

I have been using OpenDNS for quite some time simply as a means to speed up my internet connection. It works. OpenDNS serves as a domain name server (DNS). It is free for personal use, and also available for business/institutions for DNS resolution. What does this really mean? Every website name that you type into your browser is translated into an IP address via the DNS. Typically your ISP has its own DNS that is either configured automatically or through your router/ethernet software setup. Depending on how efficient your ISP’s DNS backbone is, your website resolution can vary by a magnitude of seconds. Furthermore, a good DNS can provide an additional layer of security to your computer by filtering phishing websites or preventing cache poisoning.

The more impressive aspect of this company is its success. It is managed essentially by three people. Its CEO, as I recall, graduated with a biological anthropology degree from WashU. It has a deliverable product that is available freely to the public, as well as a commercial version for generating revenue. The service doesn’t blatantly intrude into our lives a la Mark Zuckerberg’s Facebook, yet plays a substantial role in IT. Bravo indeed.

Go out and use OpenDNS. Most of you do not have an internet backbone like MIT‘s with a direct connection to Akamai. Enjoy the reliability, speed, and security of a trusted DNS.

*Note: I have no disclosures with OpenDNS, although am available for technical consultation by any party. *